Part # MKT11. For vehicle or boat. Adhesive pads supplied.
GPS will easily unclip from the mount, or part of the mount can
be removed to another vehicle or boat, by using MKT5
This mount has a 2 pin lock so that the GPS will not
bounce out in rough riding or water conditions.
|
Part # MKT10. Marine type mount. For vehicle or boat.
Three screw mounting plate supplied. GPS will easily unscrew
from the mount, or part of the mount can be removed to another
vehicle or boat, by using MKT12
This mount has a 2 pin lock so that the GPS will not
bounce out in rough riding or water conditions.
|
MKT 27 - rail or handlebar bracket for the GPS72/76 series. The bracket
incorporates the locking mechanism to hold the GPS securely. (No picture
available) Pricing.
Generic mounting accessories
to suit GPS76/72
Carry cases
for GPS76/72
Antenna accessories
to suit GPS76
|
Part # LE45PC Serial cable for computer- complete
with 9 pin female plug for standard computer port. For GPS12,
2, 3, 76, 72, MAP176 series GPS.
|
Part # LE45 bare wires cable for 12volts, and data.
Can be used for wiring GPS to radar, auto pilot, sounder,
computer or other serial device.
|
For GPS76, 72, 12XL and CX, 2, 3, 76, MAP176
series GPS.
Part # LE45C cigar lighter plug for 12volts - is not
a charger.
|
Combination Y cable, GPS connection splits to12v Cigar
lighter cable and Serial computer cable with 9 pin female plug.
- is not a charger. Part # LE45CI
|
 Part # GA27C (for GPS76,
not GPS72) Low profile aerial with magnetic mount, and suction
mount for inside windscreen. This item has an MCX connector.
Can be supplied with long screws for mounting on a 4WD snorkel.
Other aerial combinations
|
Free Offers at Johnny
Appleseed GPS
|