|
Replacement adhesive pad (removeable) for car bracket base,
MKT5, MKT8, MKT9, MKT12. used for eTrex, eMap, GPSMAP176
and GPS76 series GPS. Garmin Part #291-00037-00 packet of
3.
|
Part # MKT5 Mounting base with permanent and temporary adhesive
pads. Mount one in each of your vehicles. Then use with any
vehicle type mounting such as those listed below. Additional
adhesive pads are always available. See picture at left.
|
Pad mount, flexible, weighted, non-skid material- will mould
to any shape. With slide/clip mount for Garmin GPS brackets.
Size 180 x 210mm. Will sit on any dashboard. Part # MKT13
Garmin part number 010-10306-00
|
Part # MB11 If the words "no installation required" make
you happy, this is the mount for you. Bean bag mount has a
no-skid bottom and Velcro" strip on the top, so your unit
sits securely on your dash, console, or other surface. Small
attached flap stores extra batteries.
|
|
 Part
# MKT12. Adaptor bracket, to convert a standard Garmin marine
mount, into a standard vehicle mount. This enables the use
of accessories such as MKT5, and MKT13 above.
Now you can take your GPS from boat to car with
no mounting hassles. Just affix this adapter to your vehicle
dash, attach the GPS with mounting bracket (eMap, GPS76, GPSMAP176),
pivot for best viewing angle, and lock into place. Comes with
permanent and temporary adhesive disks.
|
Brackets for GPS76
Brackets for GPS12 series
Brackets for eTrex series
Brackets for GPSMAP176 series
Brackets for GPS2, 3
and V series
|
Brackets for GPSMAP60
series
Brackets for GPSMAP182
Brackets for GPSMAP232
Brackets for GPSMAP2006/2010
Brackets for GPS126/128
|
Free Offers at Johnny Appleseed
GPS
|
Johnny Appleseed GPS
The all-purpose
RAM mount