DJIMatrice600 DJI 7899.00  

DJI Matrice 600 (DJIMatrice600)

DJI Part Number: DJIMatrice600

Genuine Australian Stock




Designed for Professional Aerial Photography

Total Integration

With a modular design, the M600 makes it easy to set up and is ready to use within minutes. The dust proof propulsion system simplifies maintenance while its actively cooled motors make for reliable operation during extended periods of time. The M600 is compatible with a wide range of cameras and gimbals such as the Zenmuse range and a maximum payload of 6 KG allows it to fly the Ronin-MX gimbal and cameras from Micro Four Thirds systems to the RED Epic.

Smart Flight Safety

The M600 uses sine-wave driven, intelligent ESCs to ensure it performs accurately, safely and efficiently while A3's self-adaptive flight systems adjust flight parameters automatically based on different payloads. For enhanced accuracy, the A3 can be upgraded with two additional GNSS and IMU units to A3 Pro or with D-RTK GNSS.


With triple modular redundancy and diagnostic algorithms that compare sensor data from the three sets of units in real-time, the A3 Pro ensures that the M600 flies exactly as expected. This redundant system ensures professional reliability and is ideal for filmmaking and industrial environments.


The A3 GNSS system can be upgraded with DJI's Real-Time Kinematic technology for centimetre-level accuracy. Using dual antennas, it's heading reference is more accurate than a compass sensor, and it is able to withstand magnetic interference from metal structures.

Custom 6 Battery Array for Extended Flight Time and Transmission Range

Experience an extended flight time of up to 37 minutes and a 5 KM long-range, ultra-low latency HD image transmission which ensures accurate image composition and capture. With 6 small DJI Intelligent Batteries, the M600 can be easily shipped to wherever it is needed. Its custom battery management system and power distribution board allows all 6 batteries to be turned on with the press of a button and keeps the system in flight in the event of a failure of a single battery, also allowing users to view the status of a battery in real time during a flight.


DJI Lightbridge 2 was designed from the ground up to offer professional broadcasters features such as high frame rates and HD Live Streaming. USB, mini-HDMI and 3G-SDI ports support video output at up to 1080p/60fps or a broadcast standard of 720p/59.94fps and 1080i/50fps.

Maximum Control with the DJI APPS

The M600 supports the DJI GO app and the brand new DJI Assistant 2. DJI GO lets you view important information such as battery status, redundancy status transmission status and gives you a live HD view, plus even more. You also control the camera with the DJI GO app, giving access to shutter speed, ISO, photo or video capture on any of the Zenmuse X series cameras and remote focus and aperture on the Zenmuse X5 and X5R cameras. The brand new DJI Assistant 2 app comes with a built-in flight simulator, supports firmware updates and also the new Ground Station.

Built with Developers in Mind

If you’re building software for industrial applications, the M600 is fully compatible with both the Mobile SDK and the DJI Onboard SDK featuring dual parallel CAN and API ports for connecting DJI devices – including the Guidance sensor system, the RTK GNSS units or third party components of your choice.

Visit and get up to date with drone safety in Australia - with detailed flying rules and regulations and the handy drone safety app to find out where you can and can't fly your drone.



Diagonal Wheelbase 1133 mm
Aircraft Dimensions 1668 mm x 1518 mm x 759 mm (Propellers, frame arms and GPS mount unfolded); 640 mm x 582 mm x 623 mm (Frame arms and GPS mount folded)
Package Dimensions 620 mm x 320 mm x 505 mm
Intelligent Flight Battery Quantity 6
Weight (with six TB47S batteries) 9.1 kg
Weight (with six TB48S batteries) 9.6 kg
Max Takeoff Weight 15.1 kg


Hovering Accuracy (P-Mode, with GPS) Vertical: ±0.5 m, Horizontal: ±1.5 m
Max Angular Velocity Pitch: 300°/s, Yaw: 150°/s
Max Pitch Angle 25°
Max Speed of Ascent 5m /s
Max Speed of Descent 3 m/s
Max Wind Resistance 8 m/s
Max Flight Altitude above Sea Level 2500 m
Max Speed 18 m/s (No wind)
Hovering Time (with six TB47S batteries)* No payload: 35 min, 6 kg payload: 16 min
Hovering Time (with six TB48S batteries)* No payload: 40 min, 5.5 kg payload: 18 min
* The hovering time is based on flying at 10 m above sea level in a no-wind environment and landing with 10% battery level

Propulsion System

Motor Model DJI 6010
Propeller Model DJI 2170

Flight System

Model A3


Supported DJI Gimbals Zenmuse X3; Zenmuse X5 series; Zenmuse XT; Ronin-MX; Zenmuse Z15 series HD gimbals: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4
Retractable Landing Gear Standard
Operating Temperature -10° to 40° C (14° to 104° F)


Model A14-100P1A
Voltage Output 26.3V
Power Rating 100 W

Remote Controller

Operating Frequency
  • 920.6 MHz to 928 MHz (Japan)
  • 5.725 GHz to 5.825 GHz
  • 2.400 GHz to 2.483 GHz
Max Transmission Distance (unobstructed, free of interference)
  • FCC Compliant: 5 km (3.1 miles)
  • CE Compliant: 3.5 km (2.1 miles)
  • 10 dBm @ 900 M
  • 13 dBm @ 5.8 G
  • 20 dBm @ 2.4 G
Video Output Port HDMI, SDI, USB
Dual Users Capability Master-and-Slave control
Mobile Device Holder Supports smartphones and tablets
Output Power 9 W
Operating Temperature -10° to 40° C (14° to 104° F)
Storage Temperature
  • Less than 3 months: -20° to 45° C
  • More than 3 months: 22° to 28° C
Charge Temperature 0° to 40° C (32° to 104° F)
Built-in Battery 6000 mAh, 2S LiPo
Max Tablet Width 170 mm

Battery (Standard)

Model TB47S
Capacity 4500 mAh
Voltage 22.2 V
Type LiPo 6S
Energy 99.9 Wh
Operating Temperature -10° to 40° C (14° to 104° F)
Storage Temperature
  • Less than 3 months: -20° to 45° C
  • More than 3 months: 22° to 28° C
Charge Temperature 5° to 40° C (41° to 104° F)
Max Charging Power 180 W

In The Box

  • Center Frame (With A3 and Lightbridge 2 Air System) x 1
  • Frame Arm (With Propeller Holder) x 6
  • Landing Gear Leg x 2
  • Landing Skid x 2
  • Retractable Module (Left) x 1
  • Retractable Module (Right) x 1
  • Retractable Module Mounting Rod x 2
  • Retractable Module Bracket x 2
  • Remote Controller x 1
  • Intelligent Flight Battery (TB47S) x 6
  • Charging Hub x 2
  • Spring x 2
  • Battery Charger x 2
  • Power Cable x 2
  • Micro USB Cable x 1
  • GPS-Compass Pro x 1
  • GPS Mount x 1
  • Stoppers: Arm Stopper x 6; Landing Gear Stopper x 2
  • Knob (With Gasket) x 6
  • Screws: M2x4, M3x5.5, M3x5.5 (Square Head), M3x6.5, M3x8, M3x12
  • Double Sided Tape Set
  • Tape
  • Battery Stickers
  • Manuals
    • In The Box
    • Quick Start Guide
    • Disclaimer and Safety Guidelines
    • Intelligent Flight Battery Safety Guidelines

Compatible Accessories

  • DJI Matrice 600 DJI Accessories
  • PGYTECH Part Number:
    $35.00 In Stock: Ships Within 24hrs!


    User Comments

    Average Customer Rating:  


    360° Product Viewer

    Click & Drag your mouse to the left and right to rotate the product view

    Use your mouse wheel to zoom in/out for closer look

      DJI Part Number:
      DJI Part Number: