Genuine Australian Stock




Lighter, more compact and easier to transport

The Ronin-M is for creators where space and flexibility are key.

At just 2.3 kilograms (5 pounds) the Ronin-M is almost half the weight of the original Ronin but is still strong enough to support camera setups weighting up to 3.6kg (8 pounds) while also being able to fit inside your backpack. Designed to be easy and efficient, the Ronin-M takes less than 5 minutes to set up and to start shooting. Simply mount your camera to the Ronin-M, quickly balance it and then tap a button to go. The upgraded ATS (Auto Tune Stability) technology provides you with a more precise experience than before and completes the tuning and balancing processes with no tools necessary. The Ronin-M can be disassembled and customized to achieve different shooting configurations depending on your needs, or to pack and unpack it in seconds.

New magnesium frame for improved rigidity, stiffness and strength

A single, complete piece of fine-tooled magnesium forms the U-shaped arm that holds the camera plate. This means your Ronin-M will stand up to any rugged use in any filming environment. The magnesium frame provides increased stiffness and reduced weight, with a notoriously difficult manufacturing process only made possible with DJI's large manufacturing reach and expertise. The arm not only gives you greater stability but also reliability as there is no potential for seperate pieces to come loose or move apart.
DJI Ronin-M

Multiple modes of use to capture that perfect shot

SmoothTrack technology ensures that the Ronin-M translates your movements into smooth camera angle changes. Your camera intuitively faces the direction you want, all while completely stabilized, no matter how you move. Three modes of operation provide you with the flexibility to switch between them to capture shots impossible with any other set up - without adjusting any settings or requiring a 2nd operator remote.

  • Underslung Mode

    Film effortlessly and comfortably in the most common shooting mode, holding the Ronin-M directly in front of you at chest level.

  • Upright Mode

    Shoot at or above eye-level by flipping and lifting the lightweight Ronin-M above your head. This mode is perfect for shooting out of a car's sunroof or above a crowd of people.

  • Briefcase Mode

    Filming in narrow spaces or moving throu a doorway is effortless with Briefcase mode. Turn the gimbal vertically and hold it by your side close to your legs, just like a briefcase.

Reduce the sound of each motor to almost inaudible levels with the Ronin-M's 'Silent Mode'. Its stabilization algorithms are instantly changed to focus on strength for minute changes and stabilization, making sure the sound of its motors aren't recorded by sensitive microphones or other recording equipment. Control the camera's movements with the second operator remote to achieve perfect framing and more complex camera movements while the first operator moves around set.



Built-In Functions
  1. Three Operation Modes
    • Underslung Mode
    • Upright Mode
    • Briefcase Mode
  2. Built-in, independant IMU module
  3. DJI Specialized Gimbal Drive Motors with Encoders
  4. Bluetooth Module
  5. USB Connection
  6. 2.4GHz Receiver
  7. Temperature Sensor
  8. DJI Advanced 32-Bit DSP Processor
  9. D-Bus Receiver Supported


Camera Tray DimensionsMaximum Depth at center of mass on camera base plate: 120mm; Maximum height measures from top of camera base plate: 195mm; Maximum Width: 160mm
Accessory Power Connection12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power4S Ronin-M Battery
Connections2.4 GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software RequirementsWindows XP SP3 / Windows 7 / Windows 8 (32 or 64 bit) / Mac OS X 10.9 or above
Mobile Assistant Software RequirementsMobile Device: iOS 6.1 or above, Android 4.3 or above

Mechanical and Electrical Characteristics

Working CurrentStatic current: 300mA (@16V); Dynamic current: 600mA (@16V); Locked motor current: Max 10A (@16V)
Operating Temperature-15°C to 50°C to
Weight2.3kg fully loaded with handlebar
Gimbal Dimensions500mm(W) x 210mm(D) x 420mm(H)

Working Performance

Load Weight(Reference Value)3.6kg
Angular Vibration Range± 0.02°
Maximum Controlled Rotation SpeedPan axis: 90°/s; Tilt axis: 100°/s; Roll axis: 30°/s
Mechanical Endpoint RangePan axis: 360°; Tilt axis: +105° /-190°; Roll axis: ± 110°
Controlled Rotation RangePan axis control: 90°/s; Tilt axis control: +105° /-190°; Roll axis control: ± 25°


  • Gimbal x 1
  • Handle Bar x 1
  • Remote Control - 2.4Ghz x 1
  • Tuning Stand
  • Propellers (Pair) x 4
  • Intelligent Flight Battery (TB47) x 1
  • Charger x 1
  • DJI Intelligent Battery x 2
  • Accessories Package
    • Camera Screw A (1/4") x 2
    • Camera Screw B (3/8") x 2
    • Camera Screw C (1/4") x 2
    • Camera Screw D (3/8") x 2
    • Lens Support Screw x 1
    • Lens Support
    • Allen Wrench x 3 (3mm, 4mm, & 3/16")
  • Cable Pack (ANSI cable; JIS or CE cable (varies by region))
  • Micro-USB Cable x 1
  • Camera Mounting Plate x 1

Compatible With

Sorry, no products were found


User Comments

Average Customer Rating:  


360° Product Viewer

Click & Drag your mouse to the left and right to rotate the product view

Use your mouse wheel to zoom in/out for closer look

    DJI Part Number:
    DJI Part Number:
    DJI Part Number:
    DJI Part Number:
    DJI Part Number:
    DJI Part Number: