DJIRONMX DJI 2199.00  

DJI Ronin-MX (DJIRONMX)

DJI Part Number: DJIRONMX

Genuine Australian Stock

$2,199.00
 

THIS ITEM IS DISCONTINUED

DJI Ronin-MX

CAPTURE ABOVE AND BEYOND

ENGINEERED FOR PROFESSIONALS

Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack™ algorithms ensure movements are smooth in every configuration. A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. Silent motors prevent on set mics picking up motor noise.

POWERFUL AND ACCURATE

Designed to resist high G-forces using powerful motors and IMUs, the Ronin-MX is engineered to maintain stability and hold horizon when mounted to an aircraft or a vehicle. When mounted to the M600 aerial system, it communicates directly with DJI’s flight controller and when attached to vehicles, it connects to an optional GPS module allowing it to stabilize actively for a smoother shot.


FREEDOM TO MOVE

A slip ring allows the Ronin-MX to rotate 360° continuously when mounted to aircraft or vehicles, opening up more creative options. This is further enhanced by an increase in tilt axis range from 90° straight down and beyond to 135°. Popular features of the Ronin series such as the three modes of operation and SmoothTrack™ are also present, giving film makers a range of creative angles and movements.


WIRELESS CONTROL AND TRANSMISSION

The Ronin-MX is compatible with Lightbridge 2, providing long-range HD video transmission from the air to the ground from up to 3.1miles (5km) away. If combined with the optional DJI Focus and Focus Expansion Module, focus or aperture can also be pulled remotely with a twist of the wrist. An optional Remote Start/Stop add-on provides the ability to control shooting on a range of airborne cameras.


COMPREHENSIVE APP CONTROL

Using DJI Assistant and the dedicated Assistant app for iOS and Android allows complete customization of the Ronin-MX and its behavior. If connected to Lightbridge 2, the DJI GO app can be used to control how the M600 flies including Intelligent Flight Modes, remote control modes, move the gimbal and see an HD live feed from the camera.


 

General

Built-In Functions
  • Operation Modes
    • Underslung Mode
    • Upright Mode
    • Briefcase Mode
    • Aerial Mode
    • Jib or Wirecam Mode
  • Built-in, independent IMU module
  • DJI Specialized Gimbal Drive Motors with Encoders
  • Bluetooth Module
  • USB Connection
  • 2.4 GHz receiver
  • Temperature Sensor
  • DJI Advanced 32-Bit DSP Processor
  • D-Bus Receiver Supported

Peripheral

Camera Tray Dimensions
  • Maximum depth from the center of gravity on camera base plate: 120 mm
  • Maximum height measures from top of camera base plate: 130 mm
  • Maximum width: 160 mm
Accessory Power Connections 12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU input Power 4S Ronin-M Battery
Connections 2.4 GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software Requirements Windows XP or above; Mac OS X 10.9 or above
Mobile Assistant Software Requirements iOS 7.1 or above; Android 4.3 or above

Mechanical & Electrical Characteristics

Working Current
  • Static current: 300 mA (@16V)
  • Dynamic current: 600 mA (@16V)
  • Locked motor current: Max 10A (@16V)
Operating Temperature -15° C ~ 50°C (5°F ~ 120°F)
Weight
  • Including handle bar: 2.77 kg (6.11 lbs)
  • Including vibration absorber: 2.15 kg (4.74 lbs)
Gimbal Dimensions
  • Excluding handle bar: 280 mm (W) x 370 mm (D) x 340 mm (H)
  • Including handle bar: 560 mm (W) x 370 mm (D) x 440 mm (H)

Working Performance

Load Weight (Reference Value) 4.5 kg (10 lb)
Angular Vibration Range ± 0.02°
Maximum Controlled Rotation Speed
  • Pan axis: 200°/s
  • Tilt axis: 100°/s
  • Roll axis: 30°/s
Mechanical Endpoint Range
  • Pan axis control: 360°
  • Tilt axis control: +270° to -150°
  • Roll axis control: ±110°
Controlled Rotation Range
  • Pan axis control: 360°
  • Tilt axis control: +45° to -135°
  • Roll axis control: ±25°
 

Included with the DJI Ronin MX

  • Gimbal x 1
  • Handle Bar x 1
  • Remote Control - 2.4 GHz x 1
  • Tuning Stand x 1
  • Charger x 1
  • DJI Intelligent Battery x 2
  • Cable Pack x 1
  • Micro USB Cable x 1
  • CAN Cable x 1
  • Camera Mounting Plate x 1
  • Camera Upper Mounting Plate x 1
  • Vibration Absorber x 1
  • Accessories Package:
    • Camera Screw A (1/4") x 2
    • Camera Screw B (3/8") x 2
    • Camera Screw C (1/4") x 2
    • Camera Screw D (3/8") x 2
    • Lens Support x 1
    • Lens Support Screw x 1
    • Allen Wrench x 3 (2 mm, 3 mm, 3/16")
    • Vibration Absorber Screw x 12
 

 

User Comments

Average Customer Rating:  
 

 
 

360° Product Viewer

Click & Drag your mouse to the left and right to rotate the product view

Use your mouse wheel to zoom in/out for closer look

0%
    DJI Part Number:
    DJIZMZ30
    $2,899.00
    DJI Part Number:
    DJIZMX5S
    $2,450.00
    DJI Part Number:
    DJIZMX7-04
    $2,099.00
    DJI Part Number:
    DJIRoninS
    $999.00
    DJI Part Number:
    DJIZMX3ZOOM
    $789.00