Garmin BC™ 40 Wireless Backup Camera
- Installs quickly and easily by snapping into the included license plate mount
- Wirelessly pairs with a compatible Wi-Fi enabled Garmin navigator to see the backup camera view on the navigation display
- Transmits data up to 25’ to provide a wide, clear video image of what’s behind your vehicle
- Rugged and weatherproof (water-rated to IPX7) to withstand various road conditions
- Voice commands can initiate the camera view
- Uses 2 AA batteries; battery life lasts up to 3 months with average use (lithium recommended, sold separately)
Please Note:
The BC40 cannot be operated in "Always On" mode. To preserve battery the video link will time out in the following situations:
- If the vehicle is moving less than 16 kph for two and a half minutes, the video display will timeout.
- If the vehicle is moving more than 16 kph for ten seconds, the video display will timeout.
Quick and Easy to Install
Installs quickly and easily—no drilling or wiring. Attach the license plate mount to your vehicle and snap the camera into place.
Requires No Drilling or Wiring
We eliminated the hassle of wiring this camera into your car’s power supply. Just install 2 AA batteries (lithium recommended), and BC 40 is ready to go.
Control With Your Voice
You can use simple voice commands, such as "Show video," to initiate the BC 40 camera view.
General
Physical Dimensions (W x H x D) | 15.85 cm x 2.18 cm x 2.49 cm |
Weight | 58.9 g |
Battery | 2 AA (lithium recommended, not included) |
Battery life | Up to 3 months (average use) |
Water Rating | IPX7 |
Camera Features
Camera Resolution | Up to 720P (with compatible Garmin navigator) |
Field of View | 160 degrees |
Frame Rate | Up to 15 FPS |
Wireless Transmission Distance | Up to 26 feet |
In The Box:
- BC 40
- Bracket Mount
- Documentation