940-3113-0 Hemisphere 7456.00  

Hemisphere VS330 L1 Heading Receiver Kit (940-3113-0)

Hemisphere Part Number: 940-3113-0

Hemisphere VS330 L1 Heading Receiver Kit
Version:
$7,456.00
In Stock: Ships Today for free!
Check Store Availability:

Services Available
Stock Availability
Pay In-Store
Special Order (Notify Me)
Pay In-Store
Special Order (Notify Me)
Pay In-Store
Last One!
Click & Collect
Last updated: 10:30 AM, 11 December 2018
Seen a better price elsewhere? Click here to chat to us for a price match!
 

VS330 Heading Receiver Kit

Professional Heading and Positioning Receiver

Extremely accurate heading with both short and long baselines.

Experience the Vector™ VS330™ with Eclipse™ GNSS technology, an addition to the Hemisphere Vector VS family. Developed for precise marine and land applications which require precise heading and RTK position performance from the Vector VS330 GNSS receiver compass.
The Vector VS330 utilizes all of the innovations in Hemisphere GPS' Eclipse Vector technology. Optimising Eclipse Vector technology brings a series of new features to the Vector VS330 including heave, pitch and roll output, and more robust heading and positioning performance.
The Vector VS330 receiver, with its display and user interface, can be conveniently installed near the operator. The two antennas (sold separately) are mounted separately and with a user-determined separation to meet the desired heading accuracy.
The Vector VS330 uses L-band DGNSS/HP/XP and SBAS (WAAS, EGNOS, MSAS, etc.) for differential GPS positioning.
The VS330 professional heading receiver Requires 2 antennas to be purchased separately. This part number includes 10HZ, and L1 only activation codes.
 
GPS Sensor Specifications

Receiver Type: Vector GNSS L1 (L2 and RTK can be purchased separately)
Signals Received: GPS, GLONASS, Galileo
Channels: 270
GPS Sensitivity: -142dBm
SBAS Tracking: 3-channel, parallel tracking
Update Rate: 10 Hz standard, 20 Hz available by subscription
Horizontal Accuracy: RMS (67%)
2DRMS (95%)
RTK: 10 mm + 1 ppm
20 mm + 2 ppm
L-band DGNSS/HP/XP (OmniSTAR HP): 0.08 m
0.16 m
SBAS (WAAS): 0.25 m
0.50 m
Autonomous, no SA: 1.2 m
2.5 m
Heading Accuracy: < 0.17° rms @ 0.5 m antenna separation
< 0.09° rms @ 1.0 m antenna separation
< 0.04° rms @ 2.0 m antenna separation
< 0.02° rms @ 5.0 m antenna separation
< 0.01° rms @10.0 m antenna seperation
Pitch/Roll Accuracy: < 1° rms
Heave Accuracy: 30 cm (DGPS), 10 cm (RTK)
Timing (1PPS) Accuracy: 20 ns
Rate of Turn: 100°/s maximum
Compass Safe Distance: 30 cm (with enclosure)
Cold Start: < 40 s (no almanac or RTC)
Warm Start: < 20 s typical (almanac and RTC)
Hot Start: < 5 s typical (almanac, RTC and position)
Heading Fix: < 10 s typical (valid position)
Maximum Speed: 1,850 mph (999 kts)
Maximum Altitude: 18,288 m (60,000 ft)


Beacon Sensor Specifications
Channels: 2-channel, parallel tracking
Frequency Range: 283.5 to 325 kHz
Operating Modes: Manual, automatic and database
Compliance: IEC 61108-4 beacon standard


L-band DGNSS/HP/XP Sensor Specifications
Sensitivity: -130 dBm
Channel Spacing: 7.5 KHz
Satellite Selection: Manual and Automatic
Reacquisition Time: 15 seconds (typical)
Rejection: 15 kHz spacing > 30 dB
300 kHz spacing > 60 dB
Processor: DSP for demodulation and protocol decoding module provides processing for the differential algorithms
Command Support: Reports L-band DGNSS/HP/XP(OmniSTAR) region, satellite info, allows input and status of L-band DGNSS/HP/XP (OmniSTAR) subscription, Bit Error Rate (BER) output for reception quality indication and manual frequency tuning
Communications
Serial Ports: 2 full-duplex RS-232, 1 full-duplex RS-422 port
USB Ports: 1 USB-A
Baud Rates: 4800 - 115200
Correction I/O Protocol: RTCM v2.3 (DGPS), RTCM v3 (RTK), CMR, CMR+
Data I/O Protocol: NMEA 0183, Crescent binary
Timing Output: 1PPS CMOS, active low, falling edge sync, 10 kΩ, 10pF load


Environmental
Operating Temperature: -30°C to 70°C (-22°F to 158°F)
Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Humidity: 95% non-condensing (when installed in an enclosure)
Enclosure Rating: IP66 (IEC 60529)
Shock and Vibration: Mechanical Shock: EP455 Section 5.14.1 Operational (when mounted in an enclosure with screw mounting holes utilized) EP455 Vibration: Section 5.15.1 Random
EMC: CE (IEC 60945 Emissions and Immunity) FCC Part 15, Subpart B CISPR22


Power
Input Voltage: 8 to 36 VDC
Power Consumption: < 6.2 W nominal (GPS (L1/L2), GLONASS (L1/L2) and L-band DGNSS/HP/XP)
< 5.3 W nominal (GPS L1/L2) and GLONASS (L1/L2))
Current Consumption: < 0.52 A nominal (GPS L1/L2), GLONASS (L1/L2) and L-band DGNSS/HP/XP)
< 0.44 A nominal (GPS L1/L2) and GLONASS (L1/L2))
Power Isolation: 500 V
Reverse Polarity Protection: Yes
Antenna Short Circuit Protection: Yes
Antenna Input Impedance: 50 Ω


Mechanical
Dimensions (L x W x H): 20.2cm x 12.0cm x 7.5cm (8.0" x 4.7" x 3.0")
Weight: 1.1kg (2.5 lb)
Status Indications (LED): Power, Primary and Secondary GPS lock, Differential lock, DGPS position, Heading, RTK lock, L-band DGNSS/HP/XP lock
Power Switch: Front panel soft switch
Power/Data Connector: 9-pin ODU metal circular
Power Connector: 2-pin ODU metal circular
Data Connector: DB9 (sealed)
Antenna Connectors: 2 TNC (female)


Aiding Devices
Gyro: Provides smooth heading, fast heading reacquisition and reliable < 5° per minute heading for periods up to 3 minute when loss of GPS has occurred
Tilt Sensors: Provide pitch, roll data and assist in fast start-up and reacquisition of heading solution


Specifications are provided as a guide only, and are subject to change without notice.
 
 

 

User Comments

Average Customer Rating:  
 

 
 

360° Product Viewer

Click & Drag your mouse to the left and right to rotate the product view

Use your mouse wheel to zoom in/out for closer look

0%
    Hemisphere Part Number:
    940-3078-000
    $11,595.00
    Hemisphere Part Number:
    940-2181-10
    $8,999.00
    Hemisphere Part Number:
    940-3095-0
    $5,652.00