RAM® Tab-Tite™ Tablet Holder for Panasonic Toughpad FZ-G1
- Spring-loaded holder secures the Panasonic Toughpad FZ-G1; interchangeable end cups allow you to modify the holder when upgrading devices
- Compatible with B and C size RAM® round ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
- Made of high-strength composites for durability and reliability in the most demanding environments
- Backed by a lifetime warranty
The RAM-HOL-TAB19U consists of a spring loaded back plate and custom support cups for the Panasonic Toughpad FZ-G1. The spring loaded design makes it easy to load
and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing
access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended.
Perfect for stationary or on the go applications, the RAM-HOL-TAB19U is just what you need to get the most out of your tablet. Included is a set of four nuts and
bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
For off-road environments and extreme use, RAM recommends the use of a tether to assist in retaining your device. The Tab-Tite™ cradle is compatible with any tablet
that will fit the dimensions listed in the specs tab. It is important to verify the dimensions of your tablet when determining the overall size.
Specifications
| Hardware Included |
- Assembly Hardware
- (4) #8-32 x 5/8" Machine Screws
- (4) #8-32 x 1/2" Machine Screws
- (4) #8-32 Nylock Nuts
|
| Holder Dimensions |
- Height Range: 10.75" - 13.375"
- Width Range: 6.5" - 7.75"
- Depth Range: .13" - .93"
|
| Hole Pattern |
4-Hole AMPS: 1.181" x 1.496" |
| Materials |
High strength composite |
| Packaging Type |
Poly Bag |
| Weight |
340 g (0.75 lbs.) |
| Additional Information |
If your tablet has a handstrap integrated in the back, a set of risers (RAM-HOL-TAB-RISER1U or RAM-HOL-TAB-RISER2U) may
be required to offset the cups to accomodate the added thickness. This holder will not support the Panasonic Toughpad
FZ-G1 with an extended battery pack.
|
Reviews
Average Customer Rating:
(5 out of 5 based on 1 review)
360° Product Viewer
Click & Drag your mouse to the left and right to rotate the product view
Use your mouse wheel to zoom in/out for closer look