RAP-SB-224-2-UN7U RAM 62.00  

RAM X-Grip Cradle Suction Cup (RAP-SB-224-2-UN7U)

RAM Part Number: RAP-SB-224-2-UN7U

(4.3 out of 5, 24 reviews)
4.3524
$62.00
In Stock: Ships Within 24hrs from $7.95!
Check Store Availability:

Services Available
Stock Availability
Pay In-Store
Last One!
Pay In-Store
5
Pay In-Store
On Order (Notify Me)
Last updated: 9:04 PM, 18 December 2018
Seen a better price elsewhere? Click here to chat to us for a price match!
 

The RAP-SB-224-2-UN7 Universal X-Grip Mobile Phone Cradle Suction Cup RAM Mount is a low profile mounting system with a universal RAM cradle.

The RAP-SB-224-2-UN7 is compatible with the Apple iPhone 7, iPhone 8 and iPhone X.

The mount is designed with a RAM Snap-Link friction ball and socket system that has one adjustment point at the cradle end of the mount. Once the suction cup base is securely mounted, you can move the Universal X-Grip Mobile Phone Cradle to your optimum viewing position with a simple twist of the mount joint.

The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your mobile phone.

This mount is compatible with all iPhone models (including the iPhone 5), the iPod Touch and the iPod (G1-G5) - with or without cases and sleeves.

It's also compatible with handheld devices that will fit the dimensions listed below:

Minimum Width = 0.875" (2.22cm)
(Devices at 0.875" must be a minimum of 4" (10.16cm) in height to fit into holder)
Maximum Width = 3.25" (8.25cm)
Depth = 0.875" (2.22cm)
 
Material: High Strength Composite
Colour: Black


Specifications are provided as a guide only, and are subject to change without notice.
 
 

Compatible With

RAM Part Number:
RAM-HOL-UN7-UP
$6.00 In Stock: Ships Within 24hrs!
Garmin Part Number:
010-01532-41
Garmin Part Number:
010-01532-40
Garmin Part Number:
010-01539-40
 

 

Reviews

Average Customer Rating:  
  (4.3 out of 5 based on 24 reviews)

Verified Buyer's Rating
5 5
, Kiama
14 February 2018
 

Great piece of kit.

I use it on an ocean racing ski to hold my iPhone (in a waterproof bag) I run a paddling app called 'motionize', it also holds my Garmin gps. It gets hit by waves and never lets go. You don't have to worry about loosing your expensive phone or gps when it's secured by this, but I do have a tether attached just in case. A great piece of kit and a great price from ja-gps.

Pros: It's simple to use and stays where you stick it
Cons: Haven't found any yet
1 of 1 people found this review useful
Was this review helpful to you?
 
 

 
Verified Buyer's Rating
3 5
, Rural Vic
18 October 2017
 

Good unit - but there's better RAM mount options.

I'm a fond user of RAM mounts both in the car and on the motorbike. I have found their quality to be nothing short of excellent and beyond expectations. Maybe I'm rating this a bit hash because I'm used to the high quality of product that RAM mounts give - but I was a little disappointed when I received this product - as it's the first unit that has met expectation, but not exceeded it like others I've purchased. This unit isn't fully modular like previous RAM mount units I've purchased. It doesn't have the same feel or quality as other RAM mount units, and seems to be a little more restrictive with angles compared to other units I've purchased. Don't misunderstand - there's nothing wrong with this unit, and it's still a quality piece of equipment but the next time I purchase this I'd go for the RAM-HOL-UN7BU-PLA package which contains the RAP-B-104-224U and the RAM-HOL-UN7BU as a modular unit. (And feels a little better quality again and gives me more options to add to it if it doesn't suit when I change vehicles, etc).

Pros: X-Grip works great. Looks like a good quality unit.
Cons: Not modular. Doesn't have the same feel as other Ram mount products.
1 of 1 people found this review useful
Was this review helpful to you?
 
 

 
Verified Buyer's Rating
5 5
, Melbourne.
30 August 2017
 

Doesn't fall off!

Perfect grip to window that will absolutely not fall off like every onther one I've had. It was facing the phone too far downwards on install however, so we had to purchase an additional piece to give it more reach to be able to seen properly. Since doing that, product is great. I think it should come with the grip though.

Pros: Great grip
Cons: Had to purchase additional piece
1 of 1 people found this review useful
Was this review helpful to you?
 
 

 
Verified Buyer's Rating
2 5
, Victoria
29 May 2017
 

Unable to utilise due to poor angle

Tried this mount in 4 different vehicles but all vehicles had the phone pointed at a downward angle which made it unusable. Mount probably has other uses, just not suitable for vehicle windscreens.

Pros: Quality RAM mount, excellent suction
Cons: Poor mounting angle, lack of adjustment
1 of 1 people found this review useful
Was this review helpful to you?
 
 

 
Verified Buyer's Rating
3 5
, Sydney
5 April 2017
 

Quality product but not suitable for all vehicles

Very sturdy piece of kit but not particularly suitable for mounting a SatNav device on a vehicle with a sloping windscreen (in my case a SAAB). The result is that the face of the SatNav is angled downwards and is therefore difficult to read, which defeats the purpose. Spring mechanism requires a bit of strength to operate but means your device is held securely. Probably perfect for a 4WD or similar..

Pros: Quality manufacture, effective suction mechanism, holds device securely
Cons: Doesn't adjust sufficiently to compensate for a sloping windscreen
1 of 1 people found this review useful
Was this review helpful to you?
 
 

 
 
 

360° Product Viewer

Click & Drag your mouse to the left and right to rotate the product view

Use your mouse wheel to zoom in/out for closer look

0%
    RAM Part Number:
    RAP-SB-180-UN7U
    $69.00
    RAM Part Number:
    RAM-GDS-SKIN-SAM25
    $69.00
    RAM Part Number:
    RAM-GDS-SKIN-SAM14U
    $60.00
    RAM Part Number:
    RAM-HOL-UN7-UP
    $6.00
    RAM Part Number:
    RAP-UN-CAP-4U
    $8.00